SKU: DG-4PLUS Sutter-Lambda DG 4 Plus Ultra High Speed Wavelength Switcher
Sutter-Lambda DG 4 Plus Ultra High Speed Wavelength Switcher
Vendor: Sutter Instrument
Part Number: sutter-lambda-dg-4plus
Sutter-Lambda DG 4 Plus Ultra High Speed Wavelength Switcher
Please note the DG-4PLUS has been replaced by
The Lambda DG-4/DG-5 Plus is a complete illumination system offering speed and versatility for experiments requiring rapid wavelength switching. New digital servo technology allows faster filter switching and 30% greater light output than the first generation DG-4/DG-5. The instrument retains all the advantages of interference filter based systems, yet eliminates the temporal constraints imposed by traditional filter changing devices like filter wheels. Switching between any two wavelengths is achieved in 0.5msec, allowing the user to perform real-time video imaging. The high switching speed of the Lambda DG-4/DG-5 Plus facilitates the ability to follow fast changes in ion concentrations in dual wavelength ratio imaging applications and to monitor other concomitant changes in the studied system at additional wavelengths.
Narrow bandpass systems, such as single cavity interference filters, grating monochromators, and A.O. modulators, pass unwanted harmonics of the desired wavelength. Also, with variable wavelength devices, it is not always possible to obtain sufficient blocking of out-of-band wavelengths. Modern interference filters, as used in the Lambda DG-4/DG-5 Plus, do not pass harmonics and have integral blocking characteristics 1000 times better than typical monochromator systems. For the same full width at half maximum (FWHM), interference filters have a narrower spectral bandpass due to the absence of the slit function.
The dual galvanometer design of the Lambda DG-4/DG-5 Plus allows tuning of the relative intensities at each wavelength. This adjustment, in variable wavelength devices with a single optical path, is difficult to obtain. Unlike monochromators and other wavelength selective systems, the Lambda DG-4/DG-5 Plus can be used as a source of white light when required.
How it works:
This unique optical design of the Lambda DG-4/DG-5 Plus is based on dual scanning galvanometers utilizing interference filters for wavelength selection. The light from the xenon arc lamp is focused on the first galvanometer mirror which directs it via a parabolic mirror, through one of the interference filter channels. Following the filter, a second parabolic and a second galvanometer mirror collect and redirect the light into the light guide. A cold mirror in the beginning of the light path eliminates the IR radiation, reducing significantly the amount of heat absorbed by the optics and the sample. Cold mirrors modified to pass near-IR to 780 to 880nm are also available.
A built-in shutter function allows reduction of light intesity by five to six orders of magnitude. For applications requiring mechanical shuttering, like time lapse experiments or very sensitive samples, the SmartShutterŽ can be installed in the device to assure that the light is completely blocked. A newly integrated SmartShutter controller eliminates the need to purchase a separate control device.
The standard system, the Lambda DG-4 Plus, holds up to four 25mm interference filters. The Lambda DG-5 Plus, a five filter version, accommodates three 18mm and two 25mm filters. While the switching time between any two wavelengths is done in less than 0.5msec, the dwell time at any wavelength is arbitrarily set by the user.
The liquid light guide can be coupled to the illumination port of most microscopes using an adapter which can be purchased separately. Please refer to the Microscope section for further information. Extended output ranges are possible with various cold mirror and light guide combinations. Phone Sutter to discuss your specific application requirements.
- NEW: USB support
- NEW: Built-in SmartShutterŽ control
- NEW: Expanded menu options and enhanced triggering
- Integral shuttering
- Integral neutral density filtering
- Two outputs for monitoring filter position
- Turbo Blanking
- Direct computer control via parallel, serial, or USB interface
- Switches in 0.5msec
- Fluorescent microscopy
- Calcium imaging
- Ultra high speed wavelength selection
300 Watt pre-aligned, ozone free xenon arc bulb
(full spectrum available upon request)
330nm to 650nm - ozone free
300nm to 650nm - full spectrum
(Bulb has a prorated warranty for 500 hours. Longer life depends on application. Expected life is 1000 hours)
DG-4: Four, 25mm (1inch)
DG-5: Two, 25mm (1inch) and Three, 18mm
10in x 10in x 19in | 25cm x 25cm x 48cm
2 meters long
45lbs | 20kg
50/60 Hertz power line
All returns must be authorized by Spectra Services in order to insure proper credit and must be requested within 30 days of purchase. All returns are subject to a minimum 15% restocking charge. For returns not due to error on behalf of Spectra Services, the customer is responsible for all transportation fees related to the returned product. To ensure proper credit, each product return must include the following information:
- Customer name and address
- Purchase order number
- Spectra Services shipping order number
- Date of invoice
- Item number of returned item(s)
- Spectra Services return authorization number (RMA)
- Reason for return
Unfortunately, Spectra Services is unable to accept the following returns at this time:
- Products not in completely resalable condition (including products with damaged, missing, or defaced labeling or packaging
- Chemicals, reagents, diagnostics, sterile, or any controlled products (unless products do not meet specification
- Labroatory apparatus or instruments that have been used or are without the original packaging, labeling and operating manuals
- Refrigerated products or other perishables
- Products which are not inventoried by Spectra Services and are not able to be returned to the manufacturer
- Products purchased on a special order
- Products not purchased from Spectra Services
- Products with an expired shelf life or an expiration date too short for resale
- Discontinued products
Spectra Services reserves the right to review this policy on a case-by-case basis.
Upon receipt of the pre-owned product(s), the customer has one week to evaluate the product to ensure it meets their expectations. If for some reason the customer decides to return the product, they may do so at any point during those seven (7) days for a full refund. No restocking fee will be assessed, however, the customer is responsible for the return shipping costs. Full credit will be issued upon receipt and inspection of the item(s) to ensure equipment was returned in the same condition it was initially shipped out in.
All exchanges and returns require the completion of a Return Merchandise Authorization (RMA) form. Once completed, please return the merchandise immediately as the RMA number is only active for ten (10) days from the date of issuance.
Charges associated with returning items are the responsibility of the customer unless the item(s) arrived defective, damaged, or incorrect.
Spectra Services highly recommends that return packages be insured for full value and packaged securely to prevent shipping damage.
We're Here To Help
Your satisfaction is important to us! Use this form Contact Us to email us your questions about products, online orders, store experiences and more.
If you need help or have any other questions concerning your orders, please click on the "Contact us" form above or call: 800-955-7732.
249 David Parkway
Ontario, NY 14519 US
"I'm having a hard time searching for a product."
That's no problem. We're more than happy to assist you in your search. Give us a call, or drop us a line and let us know what you're looking for as best you can. We're always adding partner brands, and it's difficult to keep up with the thousands of products that get added to our lineup. Our sales specialists know our lineup best, and are most willing to help you find the solution(s) you need!
"Why can't I complete my order online?"
You most likely have one or more items in your shopping cart that are not priced. If you find that you can't complete an order, contact us via phone or email for further assistance.
"What types of payments do you accept?"
That's an easy one. We're very flexible when it comes to payment. Not only do we accept most major credit cards (Visa, Master Card, Discover, American Express), we also offer you the flexibility of paying by check, money order, wire transfers, and purchase orders. Work with any one of our sales specialists to figure out which method is best for you!
"Do you charge sales tax?"
Currently, we are authorized to collect sales tax in California, Connecticut, Florida, Indiana, Massachusetts, New Jersey, New York, Ohio, Pennsylvania, Texas and Washington. If we ship to any of these states, we are obligated to charge sales tax unless you provide us with a tax exempt certificate. You can either fax a copy of the certificate to our New York office (585.265.4374) or email it to Cathy ([email protected]).
"Do you offer special pricing for government and educational entities?"
Absolutely! Contact any one of our sales specialists to work out the details!
"I just placed an order. Can I modify/cancel it?"
We pride ourselves on providing you with a responsive and efficient buying experience. We are able to address your concerns in an accurate and timely fashion, and can usually ship your order within 24 hours of order placement. If you contact us within that window, we'll do our absolute best to accommodate your needs and concerns prior to shipment.
"Do you accept international orders?"
Of course! While we require a bank wire prior to shipment of the product on international orders, we assure you that the process is just as smooth for domestic orders. Take a look at our
International Shipping Policy and contact us if we can assist.
"Will I be charged for shipping?"
Shipping charges will be added to your invoice unless you provide us with your UPS, DHL, or FedEx account number. For a more detailed insight into our shipping process, see our shipping information page.
"I received a damaged shipment. What can I do?"
Accidental damage during shipment can sometimes happen. When you take delivery of your freight, please inspect thoroughly for any visible damage to the outside of the shipping container before signing for it. If there are multiple pieces to the shipment, please account for all them. Should you find that any of the products are damaged or missing after receipt, contact us within three days to address the matter.
"I'd like to make a return. How do I do that?"
Take a look at our Return Policy, and then contact us to continue with the process. Let us know if you have any questions.
"Can you guarantee pricing and availability?"
While we attempt to list and provide you the most up-to-date pricing, we reserve the right to make changes. Additionally, we cannot guarantee that we will always have a product in stock, but we do our best to accommodate your needs. If you have questions regarding pricing or availability, please do not hesitate to ask.
"Can you explain where you come up with the 'List Price,' please?"
Our "List Price" represents the full retail price as suggested by the supplier or manufacturer, the price estimated based on comparable items offered elsewhere in the marketplace, a former price the item was offered for by Spectra Services, or the price estimated in accordance with industry standards. Please note that we do our best to provide accurate list prices, and that it may vary by geographic location.