Suruga Seiki DS102MS-IO Stepping Motor Controller Stepping Motor Contoler AC100-24V


Suruga Seiki DS102MS-IO Stepping Motor Controller Stepping Motor Contoler AC100-24V
Processing...
Code: sc-ds102msio
Vendor: Suruga

FOR BEST PRICING

Get a Quote!

Product Details

Suruga Seiki DS102MS-IO Stepping Motor Controller AC100-24V

 


 

The DS102MS-IO  stepping motor controller is a small and low cost two axis controller for driving two 5-phase DS102 (0.75A/phase) stepping motors. The DS102MS-IO is a micro step driver type controller with 16 levels and an I/O port for controlling external devices .

  •  Linear interpolation of two axes is possible.
  • Using the link function, it is possible to link and use three units (up to six axes can be controlled). Using a USB hub connection, one PC can control up to 24 axes. 
  • RoHS compliant, you can use this product overseas with ease. 
  • Compatible with the D200 series, so you can use your existing software without changes. 

Note 1：For setting the program functions and teaching functions, etc., of the DS102 series controller, the separately available 'DT100' handy terminal and dedicated control software 'DSCONTROL-WIN' are required. 

Note 2：You cannot use the solenoid brake as is. Please contact us.

    
         
     
  1.Power switch *1
2.POWER LED
3.TERMINAL
 4.RS232C *2
5.USB Connector *3
6.LINK Connector7.DIP switch *4
8.EMS Connector *5
 9.For control I/O connector *6
10.Universal I/O connector *7
11.Stage connector*8
12.Fuse holder
13.AC Inlet		    
           
  Specifications:      
 
Outside dimension 140（W）×300（D）×90（H）mm
Input power AC100～240V±10％、50/60Hz
Maximum power consumption 70W or less
Driver type micro step (16 levels)
Driver rated current 0.75A/phase
Number of control axis 2
Coordinate setting range ±99,999,999pls
Driving speed setting range 1～999,999pps
Startup speed setting range 1～9,999pps
Acceleration/deceleration speed time setting range 1～9,999ms
Machine limit Two points per axis　CW/CCW direction (logic switchable)
Proximity origin detection 1 point per axis (logic switchable)
Origin detection 1 point per axis (logic switchable)
Origin detection method 12 methods
home position 1 point per axis (can be set arbitrarily within valid display range)
External communication interface RS232C:4,800～38,400bps【D-SUB9 pin male】 Only USB2.0: Full/Low Speed is supported【mini USB B terminal】 DIO: Input 9 points (24V photo coupler), output 12 point (open collector)
Link function RS485 (up to 3 units and 6 axes can be controlled externally by daisy chain)
Program function 8 program (100 step/program, can be started and stopped by control I/O)
Teaching function 64 points (positioning is enabled by control I/O)
Interpolating function 6 axis interpolation (however, linear interpolation between linked equipment is not available)
General I/O Input 16 point (24V photo coupler) Output 12 points (open collector)
Weight 2.2kg