Secure Checkout
Radwag Analytical Balance XA 120/250.4Y PLUS WL-107-1034

Thumbnail Filmstrip of Radwag Analytical Balance XA 120/250.4Y PLUS WL-107-1034 Images

    Radwag Analytical Balance XA 120/250.4Y PLUS WL-107-1034

    SKU: WL-107-1034




    Vendor: Radwag
    Shipping Weight: 5.00 pounds
    Part Number: radwag-wl-107-1034

    Product Documents

    Radwag Analytical Balance XA 120/250.4Y PLUS WL-107-1034

    Please note the WL-107-1034 has been replaced by WL-110-1002

    The XA 4Y PLUS analytical balances provide the best minimum weight in the market and are intended for the most complex weighing of small masses. The devices are highly resistant to ambient conditions and their ergonomic design ensures convenient operation.

    Innovative 2-Point Adjustment System
    The 2-point adjustment system guarantees the most accurate measurement and minimized linearity errors, this ensures reliable measurement results for the whole range.

    Smart Min Weight
    Unique design solutions of the XA 4Y PLUS analytical balances guarantee the best value of minimum weight among professional-class solutions available on the market.

    Faster Measurement with the New CPU
    The 4Y balances are equipped with Dual Core 2× 1 GHz processor and offer new possibilities of fast operation assuring short indication stabilization time at a respective repeatability.

    16 GB Memory - New Possibilities of Data Management
    Upgraded 16 GB memory enables record of measurement data in a form of reports, time and statistical graphs.

    Second to None Repeatability and Compliance with USP
    The highest measurement accuracy, repeatability of sd ≤ 0.08 mg and compliance with USP (Chapter 41 and 1251) make the 4Y series balance a new benchmark of mass measurement quality.

    Ergonomics and Safety of Operation
    Spacious weighing chamber and large open-door clearance allow easy access to the weighing pan and facilitate use of laboratory glassware of various sizes and dimensions. Special design of the weighing chamber glass pane guides (no edges) facilitates control of cleanliness during everyday operation. Panes disassembly does not require use of any tools, which makes keeping the device clean easy.

    LevelSENSING System
    The in-built sensors measure tilt and display graphic message on the weighing device screen. Levelling system facilitates adjustment, controls the level state, and informs about level deviations, all this in accordance with GLP and GMP.

    Additional 21 CFR Part 11 Compliance Module
    All XA 4Y PLUS analytical balances are complaint with 21 CFR part 11 regulations and with provisions of EU GMP part 4, annex 11. They are equipped with a number of security and monitoring functions that control work of particular operators and an electronic signature.

    Full data protection:

    • advanced password settings
    • verification of log in correctness
    • assigning operators with individual permissions
    • auto logout
    • electronic signature, e.g. for series of measurements
    • granting/denying access to data management
    • backup
    • modifications saved to Audit Trail file

    Datasheet

    Metrological parameters
    Physical parameters
    Communication interface
    Electrical parameters
    Environmental conditions
    Maximum capacity [Max]

    120 / 250

     g

    Minimum load

    1

     mg

    Readability [d]

    0.01 / 0.1

     mg

    Tare range

    -250

     g

    Linearity

    ±0.06 / 0.2

     mg

    Eccentric load deviation

    0.2

     mg

    Stabilization time

    4

     s

    Adjustment

    internal (automatic)

     

    OIML Class

    I

     

    Standard repeatability [5% Max]

    0.006

     mg

    Standard repeatability [Max]

    0.06

     mg

    Standard minimum weight (USP)

    12

     mg

    Standard minimum weight (U=1%, k=2)

    1.2

     mg

    Permissible repeatability [5% Max]

    0.012

     mg

    Permissible repeatability [Max]

    0.1

     mg

    Display

    5.7” resistive colour touchscreen

     

    Weighing chamber dimensions

    173×190×228

     mm

    Weighing pan dimensions

    ø90 + ø85 (option)

     mm

    Packaging dimensions

    720×385×485

     mm

    Net weight

    9.8

     kg

    Gross weight

    14.3

     kg

    Communication interface

    2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

     

    Power supply

    100 — 240 V AC 50 / 60 Hz

     

    Power consumption max.

    10 W

     

    Operating temperature

    +10 — +40

     °C

    Relative humidity

    40% — 80%