DRIVING RESEARCH SINCE '77
Secure Checkout
Radwag Analytical Balance XA 110.4Y PLUS WL-107-0163

Thumbnail Filmstrip of Radwag Analytical Balance XA 110.4Y PLUS WL-107-0163 Images

    Radwag Analytical Balance XA 110.4Y PLUS WL-107-0163

    SKU: WL-107-0163




    Vendor: Radwag
    Part Number: radwag-wl-107-0163

    Product Documents

    Radwag Analytical Balance XA 110.4Y PLUS WL-107-0163

    Please note the WL-107-0163 has been replaced by WL-110-0010

    The XA 4Y PLUS analytical balances provide the best minimum weight in the market and are intended for the most complex weighing of small masses. The devices are highly resistant to ambient conditions and their ergonomic design ensures convenient operation.

    Innovative 2-Point Adjustment System
    The 2-point adjustment system guarantees the most accurate measurement and minimized linearity errors, this ensures reliable measurement results for the whole range.

    Smart Min Weight
    Unique design solutions of the XA 4Y PLUS analytical balances guarantee the best value of minimum weight among professional-class solutions available on the market.

    Faster Measurement with the New CPU
    The 4Y balances are equipped with Dual Core 2× 1 GHz processor and offer new possibilities of fast operation assuring short indication stabilization time at a respective repeatability.

    16 GB Memory - New Possibilities of Data Management
    Upgraded 16 GB memory enables record of measurement data in a form of reports, time and statistical graphs.

    Second to None Repeatability and Compliance with USP
    The highest measurement accuracy, repeatability of sd ≤ 0.08 mg and compliance with USP (Chapter 41 and 1251) make the 4Y series balance a new benchmark of mass measurement quality.

    Ergonomics and Safety of Operation
    Spacious weighing chamber and large open-door clearance allow easy access to the weighing pan and facilitate use of laboratory glassware of various sizes and dimensions. Special design of the weighing chamber glass pane guides (no edges) facilitates control of cleanliness during everyday operation. Panes disassembly does not require use of any tools, which makes keeping the device clean easy.

    LevelSENSING System
    The in-built sensors measure tilt and display graphic message on the weighing device screen. Levelling system facilitates adjustment, controls the level state, and informs about level deviations, all this in accordance with GLP and GMP.

    Additional 21 CFR Part 11 Compliance Module
    All XA 4Y PLUS analytical balances are complaint with 21 CFR part 11 regulations and with provisions of EU GMP part 4, annex 11. They are equipped with a number of security and monitoring functions that control work of particular operators and an electronic signature.

    Full data protection:

    • advanced password settings
    • verification of log in correctness
    • assigning operators with individual permissions
    • auto logout
    • electronic signature, e.g. for series of measurements
    • granting/denying access to data management
    • backup
    • modifications saved to Audit Trail file

    Datasheet

    Metrological parameters
    Physical parameters
    Communication interface
    Electrical parameters
    Environmental conditions
    Maximum capacity [Max]

    110

     g

    Minimum load

    1

     mg

    Readability [d]

    0.01

     mg

    Tare range

    -110

     g

    Linearity

    ±0.06

     mg

    Eccentric load deviation

    0.06

     mg

    Stabilization time

    4

     s

    Adjustment

    internal (automatic)

     

    OIML Class

    I

     

    Standard repeatability [5% Max]

    0.006

     mg

    Standard repeatability [Max]

    0.02

     mg

    Standard minimum weight (USP)

    12

     mg

    Standard minimum weight (U=1%, k=2)

    1.2

     mg

    Permissible repeatability [5% Max]

    0.012

     mg

    Permissible repeatability [Max]

    0.03

     mg

    Display

    5.7” resistive colour touchscreen

     

    Weighing chamber dimensions

    173×190×228

     mm

    Weighing pan dimensions

    ø90 + ø85 (option)

     mm

    Packaging dimensions

    720×385×485

     mm

    Net weight

    9.8

     kg

    Gross weight

    14.3

     kg

    Communication interface

    2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

     

    Power supply

    100 — 240 V AC 50 / 60 Hz

     

    Power consumption max.

    10 W

     

    Operating temperature

    +10 — +40

     °C

    Relative humidity

    40% — 80%

     


    All returns must be authorized by Spectra Services in order to insure proper credit and must be requested within 30 days of purchase. All returns are subject to a minimum 15% restocking charge. For returns not due to error on behalf of Spectra Services, the customer is responsible for all transportation fees related to the returned product. To ensure proper credit, each product return must include the following information:

    • Customer name and address
    • Purchase order number
    • Spectra Services shipping order number
    • Date of invoice
    • Item number of returned item(s)
    • Spectra Services return authorization number (RMA)
    • Reason for return

    Non-Returnable Goods
    Unfortunately, Spectra Services is unable to accept the following returns at this time:

    • Products not in completely resalable condition (including products with damaged, missing, or defaced labeling or packaging
    • Chemicals, reagents, diagnostics, sterile, or any controlled products (unless products do not meet specification
    • Laboratory apparatus or instruments that have been used or are without the original packaging, labeling and operating manuals
    • Refrigerated products or other perishables
    • Products which are not inventoried by Spectra Services and are not able to be returned to the manufacturer
    • Products purchased on a special order
    • Products not purchased from Spectra Services
    • Products with an expired shelf life or an expiration date too short for resale
    • Discontinued products

    Spectra Services reserves the right to review this policy on a case-by-case basis.

    Pre-Owned Products

    Upon receipt of the pre-owned product(s), the customer has one week to evaluate the product to ensure it meets their expectations. If for some reason the customer decides to return the product, they may do so at any point during those seven (7) days for a full refund. No restocking fee will be assessed, however, the customer is responsible for the return shipping costs. Full credit will be issued upon receipt and inspection of the item(s) to ensure equipment was returned in the same condition it was initially shipped out in.

    Important Information

    All exchanges and returns require the completion of a Return Merchandise Authorization (RMA) form. Once completed, please return the merchandise immediately as the RMA number is only active for ten (10) days from the date of issuance.

    Charges associated with returning items are the responsibility of the customer unless the item(s) arrived defective, damaged, or incorrect.

    Spectra Services highly recommends that return packages be insured for full value and packaged securely to prevent shipping damage.

    We're Here To Help

    Your satisfaction is important to us! Use this form Contact Us to email us your questions about products, online orders, store experiences and more.

    Order Questions:

    If you need help or have any other questions concerning your orders, please click on the "Contact us" form above or call: 800-955-7732.

    Our Address:
    Spectra Services, Inc.
    249 David Parkway
    Ontario, NY 14519 US
    Phone: 800-955-7732
    I'm having a hard time searching for a product.

    That's no problem. We're more than happy to assist you in your search. Give us a call, or drop us a line and let us know what you're looking for as best you can. We're always adding partner brands, and it's difficult to keep up with the thousands of products that get added to our lineup. Our sales specialists know our lineup best, and are most willing to help you find the solution(s) you need!

    Why can't I complete my order online?

    You most likely have one or more items in your shopping cart that are not priced. If you find that you can't complete an order, contact us via phone or email for further assistance.

    What types of payments do you accept?

    That's an easy one. We're very flexible when it comes to payment. Not only do we accept most major credit cards (Visa, Master Card, Discover, American Express), we also offer you the flexibility of paying by check, money order, wire transfers, and purchase orders. Work with any one of our sales specialists to figure out which method is best for you!

    Do you charge sales tax?

    Currently, we are authorized to collect sales tax in California, Connecticut, Florida, Indiana, Massachusetts, New Jersey, New York, Ohio, Pennsylvania, Texas and Washington. If we ship to any of these states, we are obligated to charge sales tax unless you provide us with a tax exempt certificate. You can either fax a copy of the certificate to our New York office (585.265.4374) or email it to ([email protected]).

    Do you offer special pricing for government and educational entities?

    Absolutely! Contact any one of our sales specialists to work out the details!

    I just placed an order. Can I modify/cancel it?

    We pride ourselves on providing you with a responsive and efficient buying experience. We are able to address your concerns in an accurate and timely fashion, and can usually ship your order within 24 hours of order placement. If you contact us within that window, we'll do our absolute best to accommodate your needs and concerns prior to shipment.

    Do you accept international orders?

    Of course! While we require a bank wire prior to shipment of the product on international orders, we assure you that the process is just as smooth for domestic orders. Take a look at our International Shipping Policy and contact us if we can assist.

    Will I be charged for shipping?

    Shipping charges will be added to your invoice unless you provide us with your UPS, DHL, or FedEx account number. For a more detailed insight into our shipping process, see our shipping information page.

    I received a damaged shipment. What can I do?

    Accidental damage during shipment can sometimes happen. When you take delivery of your freight, please inspect thoroughly for any visible damage to the outside of the shipping container before signing for it. If there are multiple pieces to the shipment, please account for all them. Should you find that any of the products are damaged or missing after receipt, contact us within three days to address the matter.

    I'd like to make a return. How do I do that?

    Take a look at our Return Policy, and then contact us to continue with the process. Let us know if you have any questions.

    Can you guarantee pricing and availability?

    While we attempt to list and provide you the most up-to-date pricing, we reserve the right to make changes. Additionally, we cannot guarantee that we will always have a product in stock, but we do our best to accommodate your needs. If you have questions regarding pricing or availability, please do not hesitate to ask.

    Can you explain where you come up with the 'List Price,' please?

    Our "List Price" represents the full retail price as suggested by the supplier or manufacturer, the price estimated based on comparable items offered elsewhere in the marketplace, a former price the item was offered for by Spectra Services, or the price estimated in accordance with industry standards. Please note that we do our best to provide accurate list prices, and that it may vary by geographic location.