Memmert Vacuum Ovens VO29
Memmert Vacuum Ovens VO29
Digital pressure control ensures rapid and gentle vacuum drying, its speed-controlled vacuum pump (accessory) saves around 70% energy. The direct contact between the load and the heatable and removable thermoshelves in the chamber of the Memmert vacuum oven VO29 ensures rapid and uniform temperature.
FEATURES
- STAINLESS STEEL
- ATMOCONTROL
- 3 YEAR WARRANTY
- TWINDISPLAY
Temperature Specs:
- Temperature measured through 4-wire Pt100 sensor individually for each thermoshelf
- Working Temperature Range: min. 5°C above ambient up +200°C
- Setting temperature range: 0.1°C
Pressure Specs:
- Vacuum range: 5 to 1100 mbar
- Pressure control: Digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum and air are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air.
- Permitted final vacuum: 0.01 mbar
- Maximum leakage rate: 0.01 bar/h
- Pump control: speed control, optimized rinsing procedures for the pump membranes as well as signal for pump ON/OFF
- Connection: Vacuum connection with small flange DN16, and gas inlet with small flange DN16
Control Technology:
- Adjustable Parameters: Temperature (Celsius or Fahrenheit), pressure (vacuum), timer
- Language Setting: German, English, Spanish, French, Polish, Czech, Hungarian
- ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
- Timer: Counter with target time setting, adjustable from 1 minute to 99 days
- Function SetpointWAIT: the process time does not start until the set temperature is reached
Safety:
- Temperature control: Mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
- AutoSAFETY: Additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
- Auto diagnostic system: Integral fault diagnostics for temperature and humidity control
- Alarm: visual and acoustic
Electrical data
230 Volts
- (± 10%)
- 50/60 Hz
- approx. 1.7 A @ 230 V
Stainless Steel Interior:
- Material: hermetically welded stainless of extremely corrosion-resistant stainless steel, material 1.4404
- Interior: additional interior mountings of stainless steel, material 1.4404 (removable for cleaning), consisting of mounting at the sides with guide bars for thermoshleves and on top (diffusor) to avoid turbulence when aerating
- Volume: 29 I
- Dimensions: w x h x d : 15.2” x 12” x 9.8”
- Max. number of internals: 2
- Max. loading of chamber: 40 kg
- Max. loading per internal: 20 kg
Stainless Steel
For many years exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch resistant, robust and durable.
Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and recyclable without question.
Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel is undeniable in comparison to others that utilize coated sheet steel, which can corrode very quickly when in constant use.
For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, sliding shelves/grids, housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless-steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless-steel W-St. 1.4571 (ASTM 316i).
All returns must be authorized by Spectra Services in order to insure proper credit and must be requested within 30 days of purchase. All returns are subject to a minimum 15% restocking charge. For returns not due to error on behalf of Spectra Services, the customer is responsible for all transportation fees related to the returned product. To ensure proper credit, each product return must include the following information:
- Customer name and address
- Purchase order number
- Spectra Services shipping order number
- Date of invoice
- Item number of returned item(s)
- Spectra Services return authorization number (RMA)
- Reason for return
Non-Returnable Goods
Unfortunately, Spectra Services is unable to accept the following returns at this time:
- Products not in completely resalable condition (including products with damaged, missing, or defaced labeling or packaging
- Chemicals, reagents, diagnostics, sterile, or any controlled products (unless products do not meet specification
- Laboratory apparatus or instruments that have been used or are without the original packaging, labeling and operating manuals
- Refrigerated products or other perishables
- Products which are not inventoried by Spectra Services and are not able to be returned to the manufacturer
- Products purchased on a special order
- Products not purchased from Spectra Services
- Products with an expired shelf life or an expiration date too short for resale
- Discontinued products
Spectra Services reserves the right to review this policy on a case-by-case basis.
Pre-Owned Products
Upon receipt of the pre-owned product(s), the customer has one week to evaluate the product to ensure it meets their expectations. If for some reason the customer decides to return the product, they may do so at any point during those seven (7) days for a full refund. No restocking fee will be assessed, however, the customer is responsible for the return shipping costs. Full credit will be issued upon receipt and inspection of the item(s) to ensure equipment was returned in the same condition it was initially shipped out in.
Important Information
All exchanges and returns require the completion of a Return Merchandise Authorization (RMA) form. Once completed, please return the merchandise immediately as the RMA number is only active for ten (10) days from the date of issuance.
Charges associated with returning items are the responsibility of the customer unless the item(s) arrived defective, damaged, or incorrect.
Spectra Services highly recommends that return packages be insured for full value and packaged securely to prevent shipping damage.
We're Here To Help
Your satisfaction is important to us! Use this form Contact Us to email us your questions about products, online orders, store experiences and more.
Order Questions:
If you need help or have any other questions concerning your orders, please click on the "Contact us" form above or call: 800-955-7732.
249 David Parkway
Ontario, NY 14519 US
Phone: 800-955-7732
I'm having a hard time searching for a product.
That's no problem. We're more than happy to assist you in your search. Give us a call, or drop us a line and let us know what you're looking for as best you can. We're always adding partner brands, and it's difficult to keep up with the thousands of products that get added to our lineup. Our sales specialists know our lineup best, and are most willing to help you find the solution(s) you need!
Why can't I complete my order online?
You most likely have one or more items in your shopping cart that are not priced. If you find that you can't complete an order, contact us via phone or email for further assistance.
What types of payments do you accept?
That's an easy one. We're very flexible when it comes to payment. Not only do we accept most major credit cards (Visa, Master Card, Discover, American Express), we also offer you the flexibility of paying by check, money order, wire transfers, and purchase orders. Work with any one of our sales specialists to figure out which method is best for you!
Do you charge sales tax?
Currently, we are authorized to collect sales tax in California, Connecticut, Florida, Indiana, Massachusetts, New Jersey, New York, Ohio, Pennsylvania, Texas and Washington. If we ship to any of these states, we are obligated to charge sales tax unless you provide us with a tax exempt certificate. You can either fax a copy of the certificate to our New York office (585.265.4374) or email it to ([email protected]).
Do you offer special pricing for government and educational entities?
Absolutely! Contact any one of our sales specialists to work out the details!
I just placed an order. Can I modify/cancel it?
We pride ourselves on providing you with a responsive and efficient buying experience. We are able to address your concerns in an accurate and timely fashion, and can usually ship your order within 24 hours of order placement. If you contact us within that window, we'll do our absolute best to accommodate your needs and concerns prior to shipment.
Do you accept international orders?
Of course! While we require a bank wire prior to shipment of the product on international orders, we assure you that the process is just as smooth for domestic orders. Take a look at our International Shipping Policy and contact us if we can assist.
Will I be charged for shipping?
Shipping charges will be added to your invoice unless you provide us with your UPS, DHL, or FedEx account number. For a more detailed insight into our shipping process, see our shipping information page.
I received a damaged shipment. What can I do?
Accidental damage during shipment can sometimes happen. When you take delivery of your freight, please inspect thoroughly for any visible damage to the outside of the shipping container before signing for it. If there are multiple pieces to the shipment, please account for all them. Should you find that any of the products are damaged or missing after receipt, contact us within three days to address the matter.
I'd like to make a return. How do I do that?
Take a look at our Return Policy, and then contact us to continue with the process. Let us know if you have any questions.
Can you guarantee pricing and availability?
While we attempt to list and provide you the most up-to-date pricing, we reserve the right to make changes. Additionally, we cannot guarantee that we will always have a product in stock, but we do our best to accommodate your needs. If you have questions regarding pricing or availability, please do not hesitate to ask.
Can you explain where you come up with the 'List Price,' please?
Our "List Price" represents the full retail price as suggested by the supplier or manufacturer, the price estimated based on comparable items offered elsewhere in the marketplace, a former price the item was offered for by Spectra Services, or the price estimated in accordance with industry standards. Please note that we do our best to provide accurate list prices, and that it may vary by geographic location.