Your Cart (0)
Thumbnail Filmstrip of Carver 4394-ASTM AutoFour30NE-ASTM Hydraulic Laboratory Press (30 Ton) Images
Carver 4394-ASTM AutoFour30NE-ASTM Hydraulic Laboratory Press (30 Ton)
The 4394 Carver “Auto-Four” press is a four post design with bolsters for maximum rigidity. Integral hydraulic power unit is completely self-contained and electrically operated. Fully programmable controls direct press functions and provide for recipe storage. Clamp area is fully guarded with interlocked operator gate.
Chart Recorders for data acquisition are available for any of these three AutoFour ASTM Models. Chase Frame molds for pressing test plaques, Floor Stands and Chillers for controlled water cooling are available for the Plastic Model ASTM Presses (4393 & 4394).
If your application requires multiple daylights or other specific specifications, please feel free to contact factory for more information and/or a quotation to meet your specifications.
Specifications of the Bench Top Auto ASTM Plastic Molding Model AutoFour/30NE-ASTM (4394)
- Clamping force is 30 Tons (minimum 1,000 lbs)
- Adjustable Daylight 0" – 13.5" (Factory set at 4 ½”)
- Stroke 6”
- Four 4) fully threaded columns
- Self-contained 1/4 HP hydraulic unit
- (2) 12” x 12” electrically heated cored for cooling, Temperature range up to 343ºC (sized for 8 ºC/minute temperature rise, Platen & perimeter insulation, Programmed platen cooling per ASTM D-4703 Procedure C (formerly D1928 procedure C), Package includes platens designed for flood cooling, inlet and outlet manifolds and valves for platens, programmable temperature controllers with ramp capability, One digital temperature controller per platen
- Programmable control system; 2 Programmable segments of clamp pressure, cure time and temperature per recipe, 10 recipe storage capability, Programmable in units of Kg, US Tons, Metric Tons & Pounds
- Two "anti-tie-down" close buttons for operator safety
- Interlocked safety enclosure with hinged door
- 230V 1-Ph supply voltage
- Electrical disconnect (non-fused)
- Dimensions: 46.5”L-R x 27.5”F-B x 61”H (uncrated)
- Weight: 1,050 pounds (uncrated)
The following calibrations and certifications are provided with the press: Pressure calibration and certification traceable to NIST (10 point check), Calibration of platen temperature controls (10 point check), Temperature uniformity of platens, Platen parallelism, Certification of timers in PLC
The ASTM Catalog#’s 4394 meet the more demanding requirements for molding test plaques in Class 5 polyethylene materials with “Auto-Four” bench top hydraulic compression presses, 30 tons clamp force. ASTM D4703 (formerly D1928) Procedure C demands accurate and controlled cooling from 180°C to 45°C. The “Auto-Four” presses have electrically heated 12” x 12” platens which are designed for automatic cooling.
- Water Requirements: 8 – 10 GPM (approximate) at 50 psi and 8 – 13 deg C
- Compressed Air Requirements: 0.5 SCFM at 80 psi (Required for platen cooling only)
NOTE: Pressure step-down will relax the force to "0" and rebound to the next lower force setpoint. To run material class 1 thru 4 requires a constant water supply of 13 deg. C (55 deg. F.) To run class 5 material, a constant water supply of 8 deg. C (45 deg. F) is necessary. Water and air cooled chillers for providing the proper process water are available as an option.
The following calibrations and certifications are provided with the press: Pressure calibration and certification traceable to NIST (10 point check), Calibration of platen temperature controls (10 point check), Temperature uniformity of platens, Platen parallelism, Certification of timers in PLC
| ASTM Chase Frame Kits Includes Two Aluminum Back-up Plates and 50 Mylar Sheets |
||||
| Description (Sample size) | Catalog Number |
100 Mylar Sheets (separate purchase) | ||
|---|---|---|---|---|
| Teflon Coated Steel | Stainless Steel | Brass | ||
| 4" x 4" x 1/8" | 4079 | 4080 | 4081 | 4161 |
| 6" x 6"x 1/8" | 4082 | 4083 | 4084 | 4162 |
| 8" x 8"x 1/8" | 4085 | 4086 | 4087 | 4163 |
Carver “Auto-Four” presses are four post design with bolsters for maximum rigidity. Integral hydraulic power unit is completely self-contained and electrically operated. Fully programmable controls direct press functions and provide for recipe storage. Clamp area is fully guarded with interlocked operator gate.
Chart Recorders for data acquisition are available for any of these three AutoFour ASTM Models. Chase Frame molds for pressing test plaques, Floor Stands and Chillers for controlled water cooling are available for the Plastic Model ASTM Presses (4393 & 4394).
If your application requires multiple daylights or other specific specifications, please feel free to contact factory for more information and/or a quotation to meet your specifications.
All returns must be authorized by Spectra Services in order to insure proper credit and must be requested within 30 days of purchase. All returns are subject to a minimum 15% restocking charge. For returns not due to error on behalf of Spectra Services, the customer is responsible for all transportation fees related to the returned product. To ensure proper credit, each product return must include the following information:
- Customer name and address
- Purchase order number
- Spectra Services shipping order number
- Date of invoice
- Item number of returned item(s)
- Spectra Services return authorization number (RMA)
- Reason for return
Non-Returnable Goods
Unfortunately, Spectra Services is unable to accept the following returns at this time:
- Products not in completely resalable condition (including products with damaged, missing, or defaced labeling or packaging
- Chemicals, reagents, diagnostics, sterile, or any controlled products (unless products do not meet specification
- Laboratory apparatus or instruments that have been used or are without the original packaging, labeling and operating manuals
- Refrigerated products or other perishables
- Products which are not inventoried by Spectra Services and are not able to be returned to the manufacturer
- Products purchased on a special order
- Products not purchased from Spectra Services
- Products with an expired shelf life or an expiration date too short for resale
- Discontinued products
Spectra Services reserves the right to review this policy on a case-by-case basis.
Pre-Owned Products
Upon receipt of the pre-owned product(s), the customer has one week to evaluate the product to ensure it meets their expectations. If for some reason the customer decides to return the product, they may do so at any point during those seven (7) days for a full refund. No restocking fee will be assessed, however, the customer is responsible for the return shipping costs. Full credit will be issued upon receipt and inspection of the item(s) to ensure equipment was returned in the same condition it was initially shipped out in.
Important Information
All exchanges and returns require the completion of a Return Merchandise Authorization (RMA) form. Once completed, please return the merchandise immediately as the RMA number is only active for ten (10) days from the date of issuance.
Charges associated with returning items are the responsibility of the customer unless the item(s) arrived defective, damaged, or incorrect.
Spectra Services highly recommends that return packages be insured for full value and packaged securely to prevent shipping damage.
We're Here To Help
Your satisfaction is important to us! Use this form Contact Us to email us your questions about products, online orders, store experiences and more.
Order Questions:
If you need help or have any other questions concerning your orders, please click on the "Contact us" form above or call: 585-265-4320.
249 David Parkway
Ontario, NY 14519 US
Phone: 585-265-4320
I'm having a hard time searching for a product.
That's no problem. We're more than happy to assist you in your search. Give us a call, or drop us a line and let us know what you're looking for as best you can. We're always adding partner brands, and it's difficult to keep up with the thousands of products that get added to our lineup. Our sales specialists know our lineup best, and are most willing to help you find the solution(s) you need!
Why can't I complete my order online?
You most likely have one or more items in your shopping cart that are not priced. If you find that you can't complete an order, contact us via phone or email for further assistance.
What types of payments do you accept?
That's an easy one. We're very flexible when it comes to payment. Not only do we accept most major credit cards (Visa, Master Card, Discover, American Express), we also offer you the flexibility of paying by check, money order, wire transfers, and purchase orders. Work with any one of our sales specialists to figure out which method is best for you!
Do you charge sales tax?
Currently, we are authorized to collect sales tax in California, Connecticut, Florida, Indiana, Massachusetts, New Jersey, New York, Ohio, Pennsylvania, Texas and Washington. If we ship to any of these states, we are obligated to charge sales tax unless you provide us with a tax exempt certificate. You can either fax a copy of the certificate to our New York office (585.265.4374) or email it to ([email protected]).
Do you offer special pricing for government and educational entities?
Absolutely! Contact any one of our sales specialists to work out the details!
I just placed an order. Can I modify/cancel it?
We pride ourselves on providing you with a responsive and efficient buying experience. We are able to address your concerns in an accurate and timely fashion, and can usually ship your order within 24 hours of order placement. If you contact us within that window, we'll do our absolute best to accommodate your needs and concerns prior to shipment.
Do you accept international orders?
Of course! While we require a bank wire prior to shipment of the product on international orders, we assure you that the process is just as smooth for domestic orders. Take a look at our International Shipping Policy and contact us if we can assist.
Will I be charged for shipping?
Shipping charges will be added to your invoice unless you provide us with your UPS, DHL, or FedEx account number. For a more detailed insight into our shipping process, see our shipping information page.
I received a damaged shipment. What can I do?
Accidental damage during shipment can sometimes happen. When you take delivery of your freight, please inspect thoroughly for any visible damage to the outside of the shipping container before signing for it. If there are multiple pieces to the shipment, please account for all them. Should you find that any of the products are damaged or missing after receipt, contact us within three days to address the matter.
I'd like to make a return. How do I do that?
Take a look at our Return Policy, and then contact us to continue with the process. Let us know if you have any questions.
Can you guarantee pricing and availability?
While we attempt to list and provide you the most up-to-date pricing, we reserve the right to make changes. Additionally, we cannot guarantee that we will always have a product in stock, but we do our best to accommodate your needs. If you have questions regarding pricing or availability, please do not hesitate to ask.
Can you explain where you come up with the 'List Price,' please?
Our "List Price" represents the full retail price as suggested by the supplier or manufacturer, the price estimated based on comparable items offered elsewhere in the marketplace, a former price the item was offered for by Spectra Services, or the price estimated in accordance with industry standards. Please note that we do our best to provide accurate list prices, and that it may vary by geographic location.
Close
Request a Quote
Related Products
