Carver 3893 AutoFour1512H 15 Ton Automatic Hydraulic Heated Laboratory PressSKU: 3893
Product Code: carver-3893
Shipping Weight: 865.00 lbs
Quantity in Basket: None
Carver Auto Series automatic hydraulic laboratory presses feature an enhanced "NE" digital control system. Offering 15 to 48 tons of clamping force (minimum 1,000 lbs). Work area of 6" x 6" to 18" x 18" platens. These benchtop presses are typically used in quality control, research and development for test sample preparations, destructive testing, molding, laminating and fluid extraction.
The new "NE" controls feature full touch screen interface with a proximity switch for adjustable slowdown position. Platen heat is controlled through the PLC on heated models and selection for auto reheat at end of cycle is provided. Platen temperature values may be entered in degrees Fahrenheit or Celsius and the display can easily be switched between the two units. Either force or temperature mode may be chosen per segment. Clamp force values may be entered in pounds, kilograms, US tons or metric tons and the display can easily be switched between units.
Carver Auto Series Presses also have two hand "anti-tie-down" close buttons and an interlocked safety enclosure with hinged door are provided for operator safety. This programmable control system has storage capacity of 10 recipes, each segmented recipe is capable of 20 programmable setpoints of: clamp force, cure time, platen temperature and bump (automatic bump sequence may be programmed in any or all segments). A self-contained 1/4 HP hydraulic unit. See below table for press specifications.
Force, Tons (lb)
|Heated Platens||Platen Size
|Ram Stroke (in)||Daylight Opening (in)||Overall Size
W x D xH (in)
|Weight (lb)||Voltage Supply|
|3893||15 (30,000)||Yes||12 x 12||6||0 to 12||44.50 x 27.75 x 46||1,050||230