DRIVING RESEARCH SINCE '77
Secure Checkout
Sutter BV-10-E Micropipette Beveler with Impedance meter and 80x Stereo Microscope

Thumbnail Filmstrip of Sutter BV-10-E Micropipette Beveler with Impedance meter and 80x Stereo Microscope Images

    Purchase Sutter BV-10-E Micropipette Beveler with Impedance meter and 80x Stereo Microscope

    Sutter BV-10-E Micropipette Beveler with Impedance meter and 80x Stereo Microscope

    SKU: BV-10-E




    Vendor: Sutter Instrument
    Shipping Weight: 70.00 pounds
    Part Number: sutter-bv-10-e

    Product Documents


    Our Price:   $7,256.00

    Sutter BV-10-E Micropipette Beveler with Impedance meter and 80x Stereo Microscope


    Elegant and simple to use, the BV-10 offers precision beveling of micropipette tips between 0.1 and 100µm. The unique abrasive plate drive system is vibration free for greater control of the beveling process. Beveling can be accomplished very rapidly and produces consistent tip diameters using the techniques as described by Brown and Flaming, Science, August 1974, Vol. 185.

    Intracellular recording electrodes can benefit from beveling because of:

    • A reduction in the tip diameter by creation of the sharp point on the electrode
    • A lowered electrical resistance of the electrode due to the larger cross sectional area of the lumen.

    This greatly facilitates penetrating and holding very small or difficult cells. Microinjection needles also benefit from beveling by promoting entry into cells with minimal damage while at the same time enhancing the flow of material through the needle.

    The basic beveling system consists of a stationary pedestal, optically flat to a half wave (250nm), surface mounted on a heavy baseplate. This serves as a bearing for an abrasive coated glass grinding plate, which is also flat to half a wave. The flat abrasive plate is coupled to a low vibration, slow-speed motor by means of magnetic fields to provide a wobble-free flat grinding surface. The abrasive plates are fabricated with a proprietary process which insures a consistent abrasive coating.

    A 2-axis micromanipulator holds the pipette to be beveled and permits controlled advancement onto the abrasive surface. The bevel angle and speed of advancement are adjustable. An LED lamp with a gooseneck enhances the beveling operation by providing sharp illumination of the abrasive plate and pipette.

    The basic system is completed with two abrasive plates of your choice, a wick with holder (for wet beveling), pedestal oil, degreasing fluid, and manual.

    Two options are available for monitoring the beveling process, an 80X stereo microscope and an electrode impedance meter. Depending on your research application, one or both of these options may be desirable. For all micropipette applications, the swing mounted microscope enhances your control of pipette advancement onto the abrasive plate and allows for viewing of the beveling operation (scope resolution is not sufficient for viewing the actual bevel except in the case of very large tips). For microelectrode applications, the impedance meter is used to monitor the tip resistance during the beveling operation. The meter is an analog design, offering three resistance ranges (0-10, 0-100, 0-500 MOhm). Measurements are made at 12 Hz to minimize capacitive contributions to the impedance measured and provide a near-true DC resistance value. A rapid roll-off is used to reduce 50/60 Hz interference, allowing operation in a laboratory environment without screening.

      FEATURES
    • Vibration-free, magnetically coupled beveling surface
    • Abrasive surface optically flat to a half wave (250nm)
    • Finest abrasive surface commercially available
    • Synchronous clock motor insures stable rotation rate
    • 7lb steel baseplate adds additional dampening
    • Integrated LED lamp
    • Robust micromanipulator controls bevel angle and advancement

    TECHNICAL SPECIFICATIONS
    Beveling Range
    0.1µm through 100µm finished electrodes depending on abrasive plate used

    Grinding Surface Variation
    less than 1.0µm

    Grinding Speed
    60 RPM

    Beveling Angle Range
    5-90 degrees - adjustable

    Micromanipulator
    course drive: 0.075in / dial revolution
    fine drive: 0.0004in / dial revolution

    Dimensions
    19in x 9in x 8in | 48cm x 22cm x 20cm

    Weight
    45 lbs | 20 kg

    Electrical
    115/230volts | 50/60 Hertz power line

    RoHS Certified

    All returns must be authorized by Spectra Services in order to insure proper credit and must be requested within 30 days of purchase. All returns are subject to a minimum 15% restocking charge. For returns not due to error on behalf of Spectra Services, the customer is responsible for all transportation fees related to the returned product. To ensure proper credit, each product return must include the following information:

    • Customer name and address
    • Purchase order number
    • Spectra Services shipping order number
    • Date of invoice
    • Item number of returned item(s)
    • Spectra Services return authorization number (RMA)
    • Reason for return

    Non-Returnable Goods
    Unfortunately, Spectra Services is unable to accept the following returns at this time:

    • Products not in completely resalable condition (including products with damaged, missing, or defaced labeling or packaging
    • Chemicals, reagents, diagnostics, sterile, or any controlled products (unless products do not meet specification
    • Laboratory apparatus or instruments that have been used or are without the original packaging, labeling and operating manuals
    • Refrigerated products or other perishables
    • Products which are not inventoried by Spectra Services and are not able to be returned to the manufacturer
    • Products purchased on a special order
    • Products not purchased from Spectra Services
    • Products with an expired shelf life or an expiration date too short for resale
    • Discontinued products

    Spectra Services reserves the right to review this policy on a case-by-case basis.

    Pre-Owned Products

    Upon receipt of the pre-owned product(s), the customer has one week to evaluate the product to ensure it meets their expectations. If for some reason the customer decides to return the product, they may do so at any point during those seven (7) days for a full refund. No restocking fee will be assessed, however, the customer is responsible for the return shipping costs. Full credit will be issued upon receipt and inspection of the item(s) to ensure equipment was returned in the same condition it was initially shipped out in.

    Important Information

    All exchanges and returns require the completion of a Return Merchandise Authorization (RMA) form. Once completed, please return the merchandise immediately as the RMA number is only active for ten (10) days from the date of issuance.

    Charges associated with returning items are the responsibility of the customer unless the item(s) arrived defective, damaged, or incorrect.

    Spectra Services highly recommends that return packages be insured for full value and packaged securely to prevent shipping damage.

    We're Here To Help

    Your satisfaction is important to us! Use this form Contact Us to email us your questions about products, online orders, store experiences and more.

    Order Questions:

    If you need help or have any other questions concerning your orders, please click on the "Contact us" form above or call: 800-955-7732.

    Our Address:
    Spectra Services, Inc.
    249 David Parkway
    Ontario, NY 14519 US
    Phone: 800-955-7732
    I'm having a hard time searching for a product.

    That's no problem. We're more than happy to assist you in your search. Give us a call, or drop us a line and let us know what you're looking for as best you can. We're always adding partner brands, and it's difficult to keep up with the thousands of products that get added to our lineup. Our sales specialists know our lineup best, and are most willing to help you find the solution(s) you need!

    Why can't I complete my order online?

    You most likely have one or more items in your shopping cart that are not priced. If you find that you can't complete an order, contact us via phone or email for further assistance.

    What types of payments do you accept?

    That's an easy one. We're very flexible when it comes to payment. Not only do we accept most major credit cards (Visa, Master Card, Discover, American Express), we also offer you the flexibility of paying by check, money order, wire transfers, and purchase orders. Work with any one of our sales specialists to figure out which method is best for you!

    Do you charge sales tax?

    Currently, we are authorized to collect sales tax in California, Connecticut, Florida, Indiana, Massachusetts, New Jersey, New York, Ohio, Pennsylvania, Texas and Washington. If we ship to any of these states, we are obligated to charge sales tax unless you provide us with a tax exempt certificate. You can either fax a copy of the certificate to our New York office (585.265.4374) or email it to ([email protected]).

    Do you offer special pricing for government and educational entities?

    Absolutely! Contact any one of our sales specialists to work out the details!

    I just placed an order. Can I modify/cancel it?

    We pride ourselves on providing you with a responsive and efficient buying experience. We are able to address your concerns in an accurate and timely fashion, and can usually ship your order within 24 hours of order placement. If you contact us within that window, we'll do our absolute best to accommodate your needs and concerns prior to shipment.

    Do you accept international orders?

    Of course! While we require a bank wire prior to shipment of the product on international orders, we assure you that the process is just as smooth for domestic orders. Take a look at our International Shipping Policy and contact us if we can assist.

    Will I be charged for shipping?

    Shipping charges will be added to your invoice unless you provide us with your UPS, DHL, or FedEx account number. For a more detailed insight into our shipping process, see our shipping information page.

    I received a damaged shipment. What can I do?

    Accidental damage during shipment can sometimes happen. When you take delivery of your freight, please inspect thoroughly for any visible damage to the outside of the shipping container before signing for it. If there are multiple pieces to the shipment, please account for all them. Should you find that any of the products are damaged or missing after receipt, contact us within three days to address the matter.

    I'd like to make a return. How do I do that?

    Take a look at our Return Policy, and then contact us to continue with the process. Let us know if you have any questions.

    Can you guarantee pricing and availability?

    While we attempt to list and provide you the most up-to-date pricing, we reserve the right to make changes. Additionally, we cannot guarantee that we will always have a product in stock, but we do our best to accommodate your needs. If you have questions regarding pricing or availability, please do not hesitate to ask.

    Can you explain where you come up with the 'List Price,' please?

    Our "List Price" represents the full retail price as suggested by the supplier or manufacturer, the price estimated based on comparable items offered elsewhere in the marketplace, a former price the item was offered for by Spectra Services, or the price estimated in accordance with industry standards. Please note that we do our best to provide accurate list prices, and that it may vary by geographic location.