My Cart: 0 item(s)

Product Search

Secure Checkout
Suruga Seiki DS112NR  Stepping Motor Controller DC24V
    Suruga Seiki DS112NR  Stepping Motor Controller DC24V
    Purchase Suruga Seiki DS112NR Stepping Motor Controller DC24V
    • Suruga Seiki DS112NR Stepping Motor Controller DC24V

      SKU: DS112NR
      Product Code: sc-ds112nr
      Vendor: Suruga
    • Quantity in Basket:  None

      Product Documents

    • Do it Now

    Suruga Seiki DS112NR Stepping motor controller DC24V

    The Suruga Seiki DS112NR  stepping motor controller is a small and low cost two axis controller for driving two 5-phase DS102 (0.75A/phase) stepping motors. Designed for industrial aplications the DS112NR is a DC24V power input, normal (FULL/HALF) driver type controller.

    • Linear interpolation of two axes is possible.
    • Using the link function, it is possible to link and use three units (up to six axes can be controlled). Using a USB hub connection, one PC can control up to 24 axes. 
    • RoHS compliant, you can use this product overseas with ease. 
    • Compatible with the D200 series, so you can use your existing software without changes. 

    Note 1:For setting the program functions and teaching functions, etc., of the DS102 series controller, the separately available 'DT100' handy terminal and dedicated control software 'DSCONTROL-WIN' are required. 

    Note 2:You cannot use the solenoid brake as is. Please contact us.

      1.Terminal stand for power supply
    3.TERMINAL *1
    4.RS232C connector *2
    5.USB connector *3
    6.LINK connector
    7.DIP switch *4
    8.EMS connector *5
    9.For control I/O connector *6
    10.Universal I/O connector *7
    11.Stage connector *8
    Outside dimension 70(W)×165(D)×155(H)mm
    Input power DC24V±10%
    Maximum power consumption 2.5A or less
    Driver type normal (FULL/HALF)
    Driver rated current 0.75A/phase
    Number of control axis 2
    Coordinate setting range ±99,999,999pls
    Driving speed setting range 1~999,999pps
    Startup speed setting range 1~9,999pps
    Acceleration/deceleration speed time setting range 1~9,999ms
    Machine limit Two points per axis CW/CCW direction (logic switchable)
    Proximity origin detection 1 point per axis (logic switchable)
    Origin detection 1 point per axis (logic switchable)
    Origin detection method 12 methods
    home position 1 point per axis (can be set arbitrarily within valid display range)
    External communication interface RS232C:4,800~38,400bps【D-SUB9 pin male 】,Only USB2.0:Full/Low Speed is supported 【 Mini USB B terminal】,DI/O:Input 9 points (24V phot coupler) 、output 12 point (open collector)
    Link function RS485 (up to 3 units and 6 axes can be controlled externally by daisy chain)
    Program function 8 program (100 step/program, can be started and stopped by control I/O)
    Teaching function 64 points (positioning is enabled by control I/O)
    Interpolating function 6 axis interpolation (however, linear interpolation between linked equipment is not available)
    General I/O -
    Weight 1.2kg