Drucker SERO 12 Blood Banking Centrifuge 00-483-009-000

The SERO 12 is carefully designed to facilitate high-quality blood grouping, typing, cross matching, and other cell-washing procedures for a wide range of tube sizes. Based on the world’s most popular blood banking centrifuge, the SERO 12 ensures samples are processed in record time, no individual handling necessary. The fully digital display makes it easy to customize cycle parameters on the fly, or select one of the 10 programmable cycles.

Drucker SERO 12 Blood Banking Centrifuge

Features

• Capacity – 6 or 12 (75-100* mm)
• Tube Sizes – 6 capped or 12 uncapped 13 x 75 mm tubes
  (up to 16 x 100 mm tubes with additional rotor)
• Display – Display shows remaining time and Verify cycle parameters
• Electronic Timer – 10 Programmable settings for custom runtime, RPM and g-force
• Intuitive Lid Lighting – No more forgotten samples! Lid lights flash at the end of each cycle and continue flashing until the lid is opened
• Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
• Positive Lid Latching – Firm mechanical latching of the lid prevents the escape of debris
• 2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out rotor design produces ideal horizontally separated samples
• Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
• Brushless DC Motor – Years of operation with no routine maintenance
• Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
• Reinforced Guard Bowl – Provides maximum safety and durability
• Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards

Specifications

• Capacity – 6 capped or 12 uncapped 13 x 75 mm tubes
  (up to 16 x 100 mm tubes with additional rotor)
• Height – 9 in. (23 cm)
• Width – 13 in. (33 cm)
• Depth – 15 in. (38 cm)
• Weight – 27 lbs. (12.3 kg)
• Max Speed – 3,550 RPM
• Max RCF – 1,040 xg
• Warranty – 2 years (extended available)

Frequently Asked Questions

What is the warranty on Drucker’s centrifuges?

Drucker Diagnostics provides a two (2) year parts and labor warranty (except the rotor – see question below).

What is the warranty on the rotor?

All rotors carry a lifetime warranty. Should the rotor ever fail, for as long as you own your centrifuge, Drucker Diagnostics will replace it free of charge.

Will I need to purchase accessories for the centrifuge separately?

All of our centrifuges are sold complete with the rotor and tube holders. No additional accessories are necessary though there are additional options available for purchase.

How often should my centrifuge be calibrated?

Drucker Diagnostics recommends the centrifuge be calibrated every 2 years or 5,000 cycles.

What should be used to clean and disinfect the Apex 6?

ONLY isopropyl alcohol, soap and water, or a 10% (5,500 PPM) bleach solution should be used for cleaning and disinfection of the centrifuge and accessories. All surfaces must be dried immediately after  cleaning and disinfecting.

What cleaning solutions should be avoided?

TBQ Germicidal products should not be used as they will cause damage to the centrifuge and void the warranty. The use of fully/partially halogenated hydrocarbons, ketones, esters, ethers, benzyls, ethyl benzenes, and all other chemicals not prescribed by Drucker Diagnostics should not be used as they may cause damage to the rotor chamber, rotor, tube holders, accessories, and centrifuge exterior. If this occurs the warranty will be voided.

Ordering Information