HRH-110 Front-Loading Autoclave with fully Automatic Drying Cycle using Heat and VacuumSKU: AT-HRH-110
Product Code: hirayama-hrh-110
Shipping Weight: 460.00 lbs
Quantity in Basket: None
FRONT-LOADING AUTOCLAVE WITH FULLY AUTOMATIC DRYING CYCLE USING HEAT AND VACUUM
Fully automatic operation from start to finish with or without drying.
One-touch door closing lever opens and closes the door easily, surely and safely.
Pre-vacuum cycle - vacuum pump removes air from the chamber when sterilizing solids such as glassware and pipette tips, thereby eliminating cold spots, and ensuring faster and more efficient sterilization.
Drying by heat and vacuum increases drying efficiency and reduces cycle times.
Additional drying mode for complete drying without having to run the sterilization cycle again.
Bacteria filter reduces re-contamination.
Lid safety interlock prevents lid from opening during a cycle, when the chamber is pressurized, or when the chamber temperature is above 97°C at which super-heated liquids might boil over when disturbed.
Door-closure sensor prevents a cycle from starting unless the door is properly closed.
HRH-110 size: 110 liters, 16.5" diameter, 31.3" depth.
Does not require in-house steam, plumbing or a floor drain hole for installation
105ºC – 135ºC (programmable)
|Temperature Display Range||
5ºC - 137ºC
1 ~ 60 min (remaining time displayed)
1 ~ 120 min (remaining time displayed)
Vacuum pump and heating
|Sterilization and Operation Modes||
|Chamber Water Source||
Auto water filling from an internal 10-liter water tank
|Maximum allowable Pressure (Gauge Pressure)||
0.206 MPa (2.06 kg/cm2G)
16.5" Diameter x 31.3" depth (420 Diameter x 795 depth) mm
Stainless steel SUS304
27.2W x 45.3D x 54.5H in, (690W x 1150D x 1385H) mm
Analog display: -0.1 ~ 0.4 MPa (-1 to 4 bar)
|Safety Devices||Pressure relief valve, circuit breaker with GFCI, vacuum pump breaker, low-water power cut-off, insufficient water in the exhaust bottle warming lamp, error messages for 1) wire breakage in temperature sensor, 2) over-heating, 3) over-cooling, 4) over-pressure, and 5) door is not properly locked|
Drain hose, water supply hose, caster stopper
1) Load sensor, square type wire basket, wire basket with solid bottom, dressing case, 2) Data logger, and 3) Digital printer
AC220V, 50/60Hz, 1 phase, 3.2kW
|Net Weight (approx.)||
462 lb, (210 kg)