My Cart: 0 item(s)

Product Search

Secure Checkout
Carver 4394-ASTM AutoFour30NE-ASTM  Hydraulic Laboratory Press (30 Ton)
    Carver 4394-ASTM AutoFour30NE-ASTM  Hydraulic Laboratory Press (30 Ton)
    Purchase Carver 4394-ASTM AutoFour30NE-ASTM Hydraulic Laboratory Press (30 Ton)
    • Carver 4394-ASTM AutoFour30NE-ASTM Hydraulic Laboratory Press (30 Ton)

      SKU: 4394-ASTM
      Product Code: carver-4394
      Vendor: Carver
    • Price: $36,364.00

      Shipping Weight: 1050.00 lbs

      Quantity in Basket:  None

      Product Documents

    •  

      Do it Now

      Fill out the rest of this form, and hit "submit." A member of our sales team will get back to you shortly.

      *Fields in bold are required.*


    Carver 4394-ASTM AutoFour30NE-ASTM Hydraulic Laboratory Press (30 Ton)


    The 4394 Carver “Auto-Four” press is a four post design with bolsters for maximum rigidity. Integral hydraulic power unit is completely self-contained and electrically operated. Fully programmable controls direct press functions and provide for recipe storage. Clamp area is fully guarded with interlocked operator gate.

    Chart Recorders for data acquisition are available for any of these three AutoFour ASTM Models. Chase Frame molds for pressing test plaques, Floor Stands and Chillers for controlled water cooling are available for the Plastic Model ASTM Presses (4393 & 4394).

    If your application requires multiple daylights or other specific specifications, please feel free to contact factory for more information and/or a quotation to meet your specifications.


    Specifications of the Bench Top Auto ASTM Plastic Molding Model AutoFour/30NE-ASTM (4394)


    • Clamping force is 30 Tons (minimum 1,000 lbs)
    • Adjustable Daylight 0" – 13.5" (Factory set at 4 ”)
    • Stroke 6”
    • Four 4) fully threaded columns
    • Self-contained 1/4 HP hydraulic unit
    • (2) 12” x 12” electrically heated cored for cooling, Temperature range up to 343C (sized for 8 C/minute temperature rise, Platen & perimeter insulation, Programmed platen cooling per ASTM D-4703 Procedure C (formerly D1928 procedure C), Package includes platens designed for flood cooling, inlet and outlet manifolds and valves for platens, programmable temperature controllers with ramp capability, One digital temperature controller per platen
    • Programmable control system; 2 Programmable segments of clamp pressure, cure time and temperature per recipe, 10 recipe storage capability, Programmable in units of Kg, US Tons, Metric Tons & Pounds
    • Two "anti-tie-down" close buttons for operator safety
    • Interlocked safety enclosure with hinged door
    • 230V 1-Ph supply voltage
    • Electrical disconnect (non-fused)
    • Dimensions: 46.5”L-R x 27.5”F-B x 61”H (uncrated)
    • Weight: 1,050 pounds (uncrated)

    ASTM International Organizational Member

    The following calibrations and certifications are provided with the press: Pressure calibration and certification traceable to NIST (10 point check), Calibration of platen temperature controls (10 point check), Temperature uniformity of platens, Platen parallelism, Certification of timers in PLC

    The ASTM Catalog#’s 4394 meet the more demanding requirements for molding test plaques in Class 5 polyethylene materials with “Auto-Four” bench top hydraulic compression presses, 30 tons clamp force. ASTM D4703 (formerly D1928) Procedure C demands accurate and controlled cooling from 180C to 45C. The “Auto-Four” presses have electrically heated 12” x 12” platens which are designed for automatic cooling.

    • Water Requirements: 8 – 10 GPM (approximate) at 50 psi and 8 – 13 deg C
    • Compressed Air Requirements: 0.5 SCFM at 80 psi (Required for platen cooling only)

    NOTE: Pressure step-down will relax the force to "0" and rebound to the next lower force setpoint. To run material class 1 thru 4 requires a constant water supply of 13 deg. C (55 deg. F.) To run class 5 material, a constant water supply of 8 deg. C (45 deg. F) is necessary. Water and air cooled chillers for providing the proper process water are available as an option.

     

    The following calibrations and certifications are provided with the press: Pressure calibration and certification traceable to NIST (10 point check), Calibration of platen temperature controls (10 point check), Temperature uniformity of platens, Platen parallelism, Certification of timers in PLC

    ASTM Chase Frame Kits
    Includes Two Aluminum Back-up Plates and 50 Mylar Sheets
    Description (Sample size)
    Catalog Number
    100 Mylar Sheets (separate purchase)
    Teflon Coated Steel Stainless Steel Brass
    4" x 4" x 1/8" 4079 4080 4081 4161
    6" x 6"x 1/8" 4082 4083 4084 4162
    8" x 8"x 1/8" 4085 4086 4087 4163

    Carver “Auto-Four” presses are four post design with bolsters for maximum rigidity. Integral hydraulic power unit is completely self-contained and electrically operated. Fully programmable controls direct press functions and provide for recipe storage. Clamp area is fully guarded with interlocked operator gate.

    Chart Recorders for data acquisition are available for any of these three AutoFour ASTM Models. Chase Frame molds for pressing test plaques, Floor Stands and Chillers for controlled water cooling are available for the Plastic Model ASTM Presses (4393 & 4394).

    If your application requires multiple daylights or other specific specifications, please feel free to contact factory for more information and/or a quotation to meet your specifications.