50 Liter Top Loading Autoclave HA-300MDSKU:
Product Code: HA300MD
Shipping Weight: 180.00 lbs
Quantity in Basket: None
Top loading design╩is ideal for the sterilization of media and other liquids in tall flasks and bottles.
Deep chamber╩for accommodating fermentors and bioreactors.
Space-saving, stand-alone╩unit occupies minimal floor space and can fit conveniently into many locations in the laboratory.
Full-count sterilization╩guarantees sterilization at the preset temperature and time. Timer pauses if chamber temperature falls 1╝C below the preset temperature.
Liquid cycles╩with slow exhaust or natural cooling for liquids and solids without drying.
Drying cycle╩for glassware and other solid loads.
Additional drying╩cycle without re-sterilization.
Micro-processor╩controlled for precise sterilization.
Internal steam╩generator uses purified water to generate pure steam.
Audio/visual alarms and on-board diagnostics╩for rapid repair.
HA-300MD size: 50 liters, 11.8" D, 26.4" H.
105╝C to 126╝C
5╝C to 129╝C
|Operating Range (gauge)||
3 to 30 psi (gauge), 0.021 to 0.21MPa
38 psi (gauge), 0.26MPa
1 to 999 minutes
1 to 120 minutes
|Overall (W x D x H)||
17.3" x 20.5" x 42.1" in (44 x 52 x 107 cm)
(Diameter x Height)
50 liter 11.8" x 26.4" (30 cm x 67 cm)
Over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff,
mechanical pressure relief valve, over-current detector and circuit breaker
|1. For solids with drying||
Sterilization -> Manual Steam/Water Exhaust -> Drying -> Completion
|2. For solids w/o drying||
Sterilization -> Auto Steam Exhaust -> Completion
|3. For liquids||
Sterilization -> Natural Cooling -> Completion
|4. For additional drying||
Drying -> Completion
Mesh wire baskets, buckets (pails), and round test tube rack
|Factory or field installed||
120V, 50/60 Hz, single phase (220V available on request)
2000 watts (2000 VA)
180 lb (82 kg)
WARRANTY: Autoclaves are protected by a 12-month warranty.