UniFlow Auxiliary Air Fume Hood with Explosion Proof Light 48" 21423


UniFlow Auxiliary Air Fume Hood with Explosion Proof Light 48" 21423
Processing...
Code: 21423
Vendor: UniFlow

FOR BEST PRICING

Get a Quote!

Product Details


HEMCO UniFlow Auxiliary Air Fume Hood with Eplosion Proof Light 48" 21423

Click Here for a PDF About UniFlow Fume Hoods and Accessories Click Here for a PDF About UniFlow Auxiliary Fume Hoods Click Here for a PDF for a HEMCO-UniFlow-PLAN-A-HOOD Work Sheet

A supply air solution for many labs that have insufficient room airflow. Equipped with auxiliary air plenum to induce added airflow to face opening of hood. Supply air ducting and remote blower is required. Equipped with Eplosion proof vapor proof light fixture Class I, Group C & D, Class II Group E, F & G electrical fixture installed but not wired, must be wired to comply with local codes. 115 volt, 60Hz AC . All electrical components and services are UL listed. Hood accessories, hood ventilation systems and explosion proof electrical options are available.

Requires a remotely located exhaust blower & auxiliary supply blower

UniFlow Auxiliary Air Flow Diagram
UniFlow Auxiliary Air Flow Diagram
Airflow (Sash Open)
Auxiliary make-up, air enters
supply plenum and is distributed down the exterior face in through sash opening.
Airflow (Sash Closed)
Auxiliary make-up, air
diverts from the supply
plenum through the airby-
pass opening into the fume chamber.
 
Complete Your Fume Hood Installation

Refer to HEMCO’s PLAN-A-HOOD to assist in the planning of your UNIFLOW Fume Hoods.

  • Auxiliary Air Supply Blowers
  • Ventilation Systems (Filters and Scrubbers)
  • Airflow Monitors and Sash Stop
  • Plumbing and Electrical Services Factory installed according to your exact specifications
  • Base Cabinets and Worksurfaces

 

Specifications and Ordering Info
UniFlow Auxiliary Air Fume Hood with Vapor Proof Light
48"

Superstructure is unitized composite FRP fire corrosion resistant non-metallic construction. Integral fume chamber is seamless glass smooth with all coved corners with adjustable VaraFlow baffle system and bell shaped exhaust collar. Picture frame sash opening has counter balanced clear tempered safety glass sash with chemical resistant PVC framing, track and aerodynamic sash lift. Built-in auxiliary air supply feature to reduce volume of conditioned air from room. Equipped with Eplosion proof vapor proof light fixture
Class I, Group C & D, Class II Group E, F & G electrical fixture installed but not wired, must be wired to comply with local codes. 115 volt, 60Hz AC . All electrical components and services are UL listed.

Requires a auxiliary supply blower see below and a remotely located exhaust blower

Model
21423

Dimensions: WxDxH 48"x24.25"x59"

   
Accessories:
AUXILIARY AIR SUPPLY BLOWER  
Belt drive steel blower and impeller wheel are epoxy coated. V-belt drive and adjustable pulleys permit field balancing. Weather housing is furnished. Motor has thermal overload protection. Specify 115 V 1 ph, 230V 1 ph, 230/460 V 3 ph. Blowers are based on 50% supply make-up. 1/4 HP 385 CFM @ 1/2” S.P. Loss
51901
SAFETY SASH STOP  
Factory installed to specified designated height. Also available for field installation.
51651
AirFlow Monitor  
Continuously monitors face velocity airflow of fume hood. Select and calibrate at desired FPM velocity set point. If the hood face velocity falls below the set point, an audible alarm sounds and a visual red indicator light appears. Airflow alarm is factory installed or can be field installed. 115 volt 60Hz 51406
 

<<< Go Back