|
The
high speed heating and automated sample manipulation make
the examina pro one of the most advanced precise temperature
control systems in the world. The precision stepper motors
enable micron accurate sample manipulation throughout the
-196 to 600°C temperature range. The motors can be set
to automatically scan the sample.
Both temperature and sample position are controlled by the
intuitive Linksys software with simple clicks on direction
buttons for movement and 'heat' 'cool' 'hold' for temperature.
A Class A Pt100 resistor ensures that temperature can be displayed
to 0.01°C and controlled to 0.1°C.
The patented design of the temperature control element and
cooling tubes enable perfect physical stablility imperative
to confocal microscopy applicaitons and important to high
magnification brightfield microscopy.
|
Features
- Can
be used with standard light microscopy, IR, X-ray, Confocal,
and Raman applications
- Temperature
Range -196°C to 600 °C (requires cooling pump)
- Heating
and cooling rates of 0.01 to 130°C/min
- PC
control using LinkSys software
- 100
ramp temperature programming
- Online
temperature/time plot
- Positional
resolution of motors 0.05µm
- Position
repeatability <3um
- 150
X,Y cordinates can be stored
- Simple
to fit fine focus attachment- Z axis (dependant on microscope)
- Max.
15mm motorized X,Y travel
- Manual
& PC operation
- Definable
sample scan area
- 7,
10 or 16mm (G7, G10 or G16) sample holders available
- Sample
vibration eliminated over entire range of speeds
- Designed
for use with the Linkam RTVMS software
- Ventilated
bottom window to eliminate condensation
- Novel
low profile lid design for rapid lens change
- Extremely
efficient use of liquid nitrogen
- Stage
body size - 160 x 80 x 24 mm
- Mounts
directly on microscope substage using stage-clamps
- Objective
lens working distance - 0.1mm to 4.9mm
- Condenser
lens minimum working distance 12.7MM
- Light
aperture - 1.3mm Ø for accurate sample temperatures
- Optional
lid and cooling jacket for high magnification lenses
|
Examina
Pro System Includes:
- MDS600
motorized stage
- MDS
motor controller
- CI94
computer interface temperature programmer
- Linksys
temperature and motor control software
All necessary cables
- Cooling
option required to extend range to -196°C
- THM-LNP94/2
automated liquid nitrogen cooling pump
- THM-LNP94/1
manual control liquid nitrogen cooling pump
|
