KDS 330 Emulsifier
The KDS 330 is designed to emulsify viscous fluids/suspensions by forcing them back and forth through a micro-emulsifying needle. The pump eliminates the fatigue and time required to manually prepare the emulsion.
The KDS 330 is ideal to prepare an adjuvant/antigen mixture to the correct viscosity ready for injection.
The KDS 330 is simple to use and set up. Through the menu driven program enter the syringe diameter, the flow rate and select a dispense volume. The KDS 330 automatically performs the calibration and control functions.
When in emulsion mode, the KDS 330 cycles from infusion to withdrawal continuously. The unit automatically infuses the preset volume and withdraws the preset volume.
Features:
The pump is based on the KDS210 in continuous mode for cycling back and forth and is specifically designed for a 10cc glass syringe and emulsion needle. Two syringes and needles are supplied with the unit.
- Simple control using a keypad, menu selection and a LCD display
- Volume setting and automatic cycling
- Rate setting
- Settings stored in memory
- Stall detection
- 5 modes of operation- Emulsion, infuse, withdraw, infuse/withdraw, withdraw/infuse
- Fast forward and reverse for easy loading
- Automatic shutoff
|
| Specifications: |
|
|
| Pump Type: |
|
Emulsifier Pump |
| Max. No. of Syringes |
|
Two |
| Syringe Size |
|
10 ml
|
| Alarms |
|
Audible and Visual Alarms of
"COMPLETE / ERROR" and "LOW BATT"
|
| Dimensions |
|
- 23 x 7.5 x 5.5 inch
- 58 x19 x 14 cm
|
Power Source
|
|
2 AA batteries
|
Weight
|
|
16 lb (7.5 kg) |
Linear Force
|
|
40 lb (18 kg) min. |
|
