OPERATING FEATURES:
- ELECTRONIC TIMER: Selectable from 1 to 30 minutes (+/-1%)
- CAPACITY: Six (6) test tubes up to 17mm x 100mm
- BRUSHLESS AC MOTOR: For smooth and quiet operation with no routine maintenance.
- QUIET OPERATION WITH LOW VIBRATION: Double-encased motor and Drucker’s unique “stability mount” assure quiet performance and low out-of-balance vibration.
- COOL RUNNING: Unique design of the motor housing and rotation chamber allows for cool operation even under the heaviest workloads.
|
SAFETY FEATURES:
-
AUTOMATIC LID LOCKING : Centrifuge will not run with the lid open; lid cannot be opened while samples are spinning.
-
POSITIVE LID LATCHING: Firm mechanical latching of the lid
prevents the escape of debris in case of breakage or an accident.
- WELDED STEEL CONSTRUCTION: For strength and durability.
-
CLEAR LID: Offers safe sample observation and optical calibration of
speed.
|
Product Information: |
The Horizon mini-E, model 642E, is a single-speed centrifuge designed for the doctor’s office or small lab. Its compact design minimizes its footprint, leaving more room on your counter. The unique horizontal rotor design allows for the test tubes to be inserted into the centrifuge at a convenient 45 degree angle. They are then gently rotated to a full horizontal position as the motor accelerates.
|
| |
 |
 |
 |
|
|
|
|
|
| |
|
|
|
| |
|
|
|
Specifications: |
|
|
| |
|
|
|
|
|
|
| |
Nominal Speed |
3,380 (+/- 100) RPM |
|
|
| |
Nominal Force |
1,600 (+/- 90) xg |
|
|
| |
Max Acceleration Time: |
15 seconds |
|
|
| |
Deceleration Time: |
60 seconds |
|
|
| |
Maximum Capacity: |
60mL (6x10mL) |
|
|
| |
Protection Breaker: |
4 Amp. Re–settable |
|
|
| |
Timer: |
Electronic, 1 to 30 minutes +/- 1% |
|
|
| |
Max. Pwr. Requirements: |
165 Watts |
|
|
| |
Voltage: |
115 (+/- 10) Volts NOTE: A 230V / 50Hz version is available. |
|
|
| |
Frequency: |
60 Hz |
|
|
| |
Overall Dimensions HxWxD: |
8.5x11x12.5 in. / 22x28x32 cm
|
|
|
| |
Weight: |
18.5 lbs. / 8.4 kg |
|
|
| |
Centrifuge Motor: |
1/30 H.P. AC |
|
|
| |
|
|
|
|
| |
The model 642E, equipped with the standard horizontal rotor, is specifically designed to spin tubes up to 17mm x 75mm / 100mm with the holders shown. Optionally, the 1525 tube cushionmay be used with 75mm tubes in the 100mm tube holder. |
|
|
| |
|
|
|
| |
* Speeds / RCFs shown are for 100mm red tube holders in the horizontal rotor. The use of cushions and/or different tube holders may alter the top speed and RCF. |
|
|
| |
See PDF for Accessories |
|
|
